China Best Sales Hydraulic Cylinder Used for Machinery and Vehicle for Farming Construction Forestry with Great quality

Product Description

China Hot Sales Double Acting Hydraulic Cylinder

This series of cylinders are widely used in hydraulic systems of industrial vehicles such as forklifts and aerial work platforms, and perform operations such as steering, lifting, tilting, and side shifting of the main engine. This series of cylinders is reasonable in structure, reliable in operation and easy to maintain. 
  
The cartridge valve of the shut-off valve can be configured as needed. 
  
The cylinders is made of high-quality alloy steel after being scraped and rolled through the inner hole; 
  
The piston rod is based on quenching and tempering, and the outer circle is coated with hard chrome, which has high rust and wear resistance; 
  
The seals adopt international famous brands that adapt to the working conditions of the main engine. 

Technical Specifications

Product Description Unit  Power 
Cylinders diameter (piston diameter)  mm  40~160 
Rod diameter (piston rod diameter)  mm  20~120 
Stroke  mm  50~2500 
Pressure  MPa  16~25 
Operating temperature  ºC  -40~120 
Piston rod coating NSS neutral salt spray test time  ≥96 

Detailed Photos

Dia of cylinder tube:     32-500mm 
Dia of rod cylinder:       30-300mm 
Working pressure:        5-32MPA 
Stroke:                           10-5000mm 
Working temperature:  -40---+50C 

Features

High Strength 
1.Joint development of new high-strength steel pipes with CHINAMFG domestic special steel enterprises 
2.Increase Work pressure 
  
High Performance 
1. On average, about 20 seconds faster than similar products 
2. Reduced working time by 19% 
  
Light Weight 
1. The lightest weight to win the biggest lift 
2. Steel pipe and hydraulic combined weight loss is about 17% 
3. Working oil volume reduced by 16% 
  
Excellent Design 
1. Optimized design, cylinder bore is reduced, working pressure is increased 
2. Using imported brand seals 
3. Respond to 2 kinds of severe conditions of high temperature and low temperature 
4. Can adapt to -40 °C -110 °C working temperature 
5. Apply 5 utility model patents 
  
Manufacturing Capabilities 
Welded Designs with 1" to 20" Bores 
Tie Rod Designs with 2" to 5" Bores 
Telescopic Designs, Single & Double Acting 
Large Bore Hydraulic Cylinders 
Stroke Lengths up to 50 Feet 
Designed for Pressures up to 7,500 PSI 
  
Custom Cylinder Features 
Integrated Linear Position Sensors 
Built-in Valves and Manifolds 
Double Ended cylinder designs 
Piggyback cylinder designs 
Integrated Cushioning and Rephasing 
Safety Designs with Velocity Fuses 
Spherical and High-Wear Bushings 
Custom Mounts and End Fittings 
High-Strength / Weight-saving Materials 
Color-matched Paint and Labeling 

Packaging & Shipping

Company Profile

HangZhou Packway Technology Development Co., LTD, founded in March 2005, has been at the forefront of innovation, constantly striving to develop cutting-edge technologies and solutions. With our headquarters located in HangZhou,we currently operate 3 subsidiary companies, each connected with different sectors of the machinery market.

Certificate Passed

Our factory has passed the certificate: ISO9001/ISO14001/CE/ROHS

FAQ

Q1: Are you a trading company or a manufacturer ?

A: We have our own factory.

Q2: Are you able to make Non-standard or customized products?

A: Yes, we can.

Q3: How long is your delivery time?

A: Normally, the delivery time is 7 days if we have stock, 20-35 working days if we don't. but it also depends on the product
requirements and quantity.

Q4: Do you provide samples? Are the samples free or not?

A: Yes, we can provide samples, but they are non-free of charge.

Q5: What is your payment term?

A: 30% deposit T/T or Irrevocable L/C at sight, If you have any questions, please feel free to contact us.

Q6: What are your after-sales services?

A: Before shipment, Each individual product will be strictly inspected on our factory QC Process System. In addition, We have a
Customer Service team to respond to customers' questions within 12 hours. Being helpful in solving customers' problems is always our goal.

Certification: CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type
Samples:
US$ 199/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

forklift hydraulic cylinder

Can hydraulic cylinders be used in electric forklifts?

Yes, hydraulic cylinders can be used in electric forklifts. While electric forklifts rely on electric motors for propulsion, they still utilize hydraulic systems, including hydraulic cylinders, for various functions. Here's an explanation of their role:

Electric forklifts commonly employ hydraulic cylinders in their lifting mechanism. The hydraulic cylinder generates the force required to lift and lower loads. The lifting mechanism typically consists of a hydraulic pump, control valves, hoses, and the hydraulic cylinder.

When the operator activates the lifting control, the electric motor powers the hydraulic pump, which pressurizes the hydraulic fluid. The pressurized fluid is then directed to the hydraulic cylinder, where it extends the piston rod, lifting the load. By controlling the flow of hydraulic fluid, the operator can precisely control the lifting speed and height.

In addition to the lifting mechanism, hydraulic cylinders may also be used in other parts of an electric forklift. For example, they can be employed in tilt mechanisms for tilting the mast or forks, in the steering system for maneuverability, or in the reach mechanism for extending and retracting the forks.

The use of hydraulic cylinders in electric forklifts allows for efficient and precise control over various lifting and operational functions. The hydraulic system provides the necessary force and flexibility required in lifting heavy loads and performing other essential tasks.

In summary, hydraulic cylinders can indeed be used in electric forklifts. They play a vital role in the lifting mechanism and other operational functions, enabling the electric forklift to perform lifting, tilting, steering, and reaching tasks with accuracy and efficiency.

forklift hydraulic cylinder

How does a forklift hydraulic cylinder contribute to load handling precision?

A forklift hydraulic cylinder plays a significant role in achieving precise load handling. Here's an explanation of how it contributes to load handling precision:

The hydraulic cylinder contributes to load handling precision in the following ways:

1. Controlled Lifting and Lowering:

The hydraulic cylinder enables controlled lifting and lowering of the forks or attachment. By adjusting the hydraulic pressure and flow, the operator can smoothly and precisely raise or lower the load. This control allows for accurate positioning of the forks and precise handling of the load, minimizing the risk of damage or accidents.

2. Variable Speed Control:

Forklift hydraulic cylinders offer variable speed control during lift and tilt operations. The operator can adjust the hydraulic flow rate to control the speed at which the forks or attachment move. This variable speed control allows for fine adjustments and precise positioning of the load, even in delicate or sensitive handling situations.

3. Load Balancing:

The hydraulic cylinder contributes to load balancing, which is crucial for precise load handling. By adjusting the extension or retraction of the cylinder, the operator can maintain a proper balance between the load and the forklift. This balance ensures stability and control during lifting, lowering, and transport, enhancing load handling precision.

4. Fork Positioning:

Hydraulic cylinders are responsible for controlling the positioning of the forks or attachment. By extending or retracting the cylinders, the operator can adjust the horizontal position of the forks, aligning them with the load or pallet. This precise fork positioning allows for accurate entry into pallets or containers, ensuring efficient load handling.

5. Attachment Control:

In forklifts with specialized attachments, hydraulic cylinders contribute to precise control of the attachment's movements. Whether it's a side shift, fork positioner, or rotating attachment, the hydraulic cylinder enables accurate adjustments and alignment of the attachment to the load. This precise attachment control enhances load handling precision, especially when dealing with unique or challenging load configurations.

In summary, a forklift hydraulic cylinder contributes to load handling precision through controlled lifting and lowering, variable speed control, load balancing, fork positioning, and attachment control. These factors work together to provide operators with the ability to handle loads with accuracy, control, and efficiency.

forklift hydraulic cylinder

How Does a Forklift Hydraulic Cylinder Handle Variations in Lift Height?

A forklift hydraulic cylinder is responsible for raising and lowering the forks or lifting platform, allowing the forklift to handle loads at different heights. It handles variations in lift height through a combination of design features and hydraulic principles. Here's a detailed explanation of how a forklift hydraulic cylinder handles variations in lift height:

1. Piston and Cylinder Design:

The hydraulic cylinder consists of a piston and a cylinder, which are sealed together to form a closed hydraulic system. The piston is connected to the forks or lifting platform, while the cylinder is fixed to the forklift frame. The design of the piston and cylinder allows for smooth movement and effective transfer of hydraulic pressure to generate lifting force.

2. Hydraulic Fluid and Pressure:

The hydraulic cylinder operates on the principle of Pascal's Law, which states that when pressure is applied to a fluid in a closed system, it is transmitted equally in all directions. In the case of a forklift hydraulic cylinder, hydraulic fluid is used as the medium to transmit pressure. When hydraulic fluid is pumped into the cylinder, it creates pressure on the piston, causing it to move upward and lift the forks or lifting platform.

3. Cross-Sectional Area and Force:

The cross-sectional area of the piston within the hydraulic cylinder determines the force that can be exerted. A larger piston area can generate a greater lifting force. By varying the diameter of the piston, forklift manufacturers can adjust the lifting capacity and handle variations in lift height. Forklifts designed for heavier loads typically have larger piston areas to generate the necessary lifting force.

4. Valves and Controls:

The hydraulic system of a forklift includes valves and controls that regulate the flow of hydraulic fluid to the cylinder. These valves, such as control valves and relief valves, allow for precise control of the lifting operation. By adjusting the valves, operators can control the speed of ascent and descent, enabling smooth and controlled variations in lift height.

5. Telescopic Cylinders:

In some forklift designs, especially those used for high-reach applications, telescopic cylinders are employed. Telescopic cylinders consist of several nested stages that extend and retract, providing increased lift height. These cylinders allow for a compact design when retracted while offering extended reach when fully extended. Telescopic cylinders enable forklifts to handle variations in lift height without compromising stability or requiring excessively long cylinder strokes.

6. Stability and Counterbalancing:

Handling variations in lift height requires maintaining forklift stability. Forklifts are designed with counterweight systems to balance the load and prevent tipping. The hydraulic cylinder's operation is coordinated with the counterweight system, ensuring that the center of gravity remains within safe limits during lifting and lowering operations. This counterbalancing helps maintain stability even when handling loads at different heights.

Through careful design, hydraulic principles, and the integration of valves and controls, a forklift hydraulic cylinder effectively handles variations in lift height. The combination of hydraulic pressure, piston and cylinder design, control mechanisms, and counterbalancing ensures precise and controlled lifting operations, allowing forklifts to safely handle loads at different heights as required in various material handling applications.

China Best Sales Hydraulic Cylinder Used for Machinery and Vehicle for Farming Construction Forestry   with Great quality China Best Sales Hydraulic Cylinder Used for Machinery and Vehicle for Farming Construction Forestry   with Great quality
editor by CX 2023-12-13