Product Description
Made In China Superior Quality Aerial Work Platform Hydraulic Electric Cylinder replacement of Toyota
Hydraulic Electric Cylinder
A hydraulic electric cylinder, also known as an electro-hydraulic cylinder or electrically actuated hydraulic cylinder, is a type of actuator that combines hydraulic power with electric control. It uses an electric motor to drive a hydraulic pump, generating pressure to actuate the cylinder.
Specification
Thrust force:1-1000KN
Stroke: 0-2000mm
Voltage:
24V,48V,220V,380V...
Here are some key points about hydraulic electric cylinders:
-
Electric Motor: The hydraulic electric cylinder incorporates an electric motor as its power source. The engine is typically powered by electricity from an external power supply or a battery. It converts electrical energy into mechanical energy to drive the hydraulic pump.
-
Hydraulic Pump: The electric motor drives the hydraulic pump and generates hydraulic pressure. It draws hydraulic fluid from a reservoir and supplies pressurized fluid to the hydraulic cylinder.
-
Hydraulic Cylinder: The hydraulic cylinder in an electrically actuated system is similar to traditional hydraulic cylinders. It consists of a cylindrical barrel, a piston or ram, and a rod that extends or retracts. The hydraulic pressure generated by the pump acts on the piston, causing linear motion of the cylinder.
-
Electric Control: Unlike traditional hydraulic cylinders, hydraulic electric cylinders feature electric control for precise and flexible operation. The electric control system allows for various control options, such as position control, speed control, force control, and programmable control. This enables accurate and repeatable motion control based on specific application requirements.
-
Advantages: Hydraulic electric cylinders offer several advantages over hydraulic or electric actuators. They combine hydraulic systems' high power density and force capabilities with the precise control and flexibility of electric systems. They can provide accurate positioning, adjustable speeds, and programmable control, making them suitable for various applications.
-
Applications: Hydraulic electric cylinders find application in various industries and systems that require precise and controlled linear motion. Some common applications include industrial automation, robotics, material handling equipment, machine tools, aerospace systems, and automotive applications. They are often used in tasks that require precise positioning, force control, or programmable motion sequences.
What should be noted when using the Hydraulic Electric Cylinder?
There are some important considerations and precautions to remember when using hydraulic electric cylinders.
1. Manufacturer's Xihu (West Lake) Dis.lines: Follow the manufacturer's guidelines, instructions, and specifications for the hydraulic electric cylinder. These guidelines will provide specific information on installation, operation, maintenance, and safety requirements for the particular cylinder model.
2. Power Supply: Ensure that the power supply for the electric motor meets the requirements specified by the manufacturer. Use the appropriate voltage, frequency, and power capacity as recommended. Follow electrical safety guidelines and local regulations when connecting the power supply.
3. System Compatibility: Ensure the hydraulic electric cylinder is compatible with the hydraulic system it will be integrated into. Consider factors like hydraulic fluid compatibility, pressure ratings, flow rates, and system design requirements. Improper compatibility can lead to performance issues, leaks, or damage to the cylinder.
4. Mounting and Alignment: Properly align the hydraulic electric cylinder to ensure smooth and accurate operation. Follow the manufacturer's guidelines for mounting methods, bolt torque specifications, and alignment procedures. Incorrect mounting or misalignment can cause unnecessary stress, vibration, or premature wear on the cylinder and associated components.
5. Electrical Safety: Adhere to electrical safety practices when dealing with the electric components of the hydraulic electric cylinder. Ensure proper grounding, use appropriate electrical enclosures, and follow safety procedures to protect against electrical hazards.
6. Maintenance and Lubrication: Regularly inspect and maintain the hydraulic electric cylinder according to the manufacturer's recommendations. This includes checking for leaks, ensuring proper lubrication, and replacing worn-out seals or components. Follow the recommended maintenance intervals and procedures to maximize the lifespan and performance of the cylinder.
7. Overload Protection: Consider incorporating overload protection mechanisms or systems to prevent excessive loads or forces that could damage the hydraulic electric cylinder. This may include using pressure relief valves, limit switches, or load-sensing devices to protect the cylinder and associated equipment.
8. Environmental Conditions: Consider the environmental conditions in which the hydraulic electric cylinder will operate. Factors such as temperature, humidity, dust, and corrosive agents can affect the performance and durability of the cylinder. Take appropriate measures, such as using protective covers or seals, to mitigate potential issues caused by adverse environmental conditions.
9. Operator Training: Ensure that operators and maintenance personnel are trained adequately on the hydraulic electric cylinder's operation, control, and safety aspects. They should be familiar with the control interfaces, emergency shutdown procedures, and any specific operational considerations associated with the cylinder.
10. System Integration: When integrating the hydraulic electric cylinder into a more extensive system or automation setup, ensure proper communication and coordination among the various components and control systems. Test the system thoroughly to ensure smooth operation and avoid any conflicts or malfunctions.
Remember, these are general considerations, and it is essential to consult the manufacturer's guidelines and recommendations specific to the hydraulic electric cylinder model you are using. Adhering to proper installation, operation, and maintenance practices will help ensure the safe and reliable operation of the hydraulic electric cylinder in your application.
Our Company
We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has 4 semi-automatic lifting cylinder assembly lines and 1 fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.
|
Forklift cylinder assembly shop |
Other types of cylinder assembly shop |
Welding
Painting & coating
|
Painting & coating line |
Fully automatic water-based |
Testing
To further improve product performance, and establish the leadership position of our hydraulic cylinder in the industry, our company and zjimee jointly established a Comprehensive performance laboratory of hydraulic cylinders, hydraulic valves, and hydraulic pumps; the lab is computer-assisted testing, using electro-hydraulic control technology, the test conditions preset by computer, which improves the test accuracy and system versatility, and the experimental data.
The automatic collection is realized through the application of sensors, and the output data, such as the internal leakage and load efficiency of the cylinder or the valve, are directly processed by the computer and converted to standard units (ml/min; %). At the same time, to ensure the working safety of the hydraulic system, the state monitoring function is carried out for key performance parameters, such as "oil temperature monitoring, liquid level monitoring, filter device monitoring," etc. Among them, the hydraulic cylinder test stand can test the performance of "load efficiency" and "internal leakage" by readings. At the same time, it is equipped with a grating ruler measuring instrument, which meets the requirements of all test items of hydraulic cylinder products in the national standard.
Our Factory
Packaging & Shipping
| Certification: | GS, RoHS, CE, ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | Normal Temperature |
| Acting Way: | Double Acting |
| Working Method: | Rotary |
| Adjusted Form: | Regulated Type |
Can Hydraulic Cylinders be Used in Forklift Attachments?
Yes, hydraulic cylinders can be used in forklift attachments to enhance their functionality and expand their capabilities. Forklift attachments are auxiliary devices that can be mounted to the forks or carriage of a forklift to perform specific material handling tasks. The addition of hydraulic cylinders to these attachments offers several advantages and enables a wide range of applications. Here's a detailed explanation of how hydraulic cylinders can be used in forklift attachments:
- Improved Lifting and Tilting:
- Extended Reach and Telescoping:
- Rotational Movement:
- Specialized Handling:
- Quick Attachment Changes:
Hydraulic cylinders can be incorporated into forklift attachments to provide enhanced lifting and tilting capabilities. For example, attachments such as fork positioners, side shifters, or paper roll clamps can utilize hydraulic cylinders to adjust the position of the forks or arms, allowing for efficient handling of different load sizes or configurations. The hydraulic cylinders enable precise control over the movement, enabling operators to lift, tilt, or adjust the position of the attachment as needed to optimize material handling operations.
Hydraulic cylinders can be employed in telescopic attachments for forklifts, enabling extended reach capabilities. Telescopic attachments consist of multiple sections that can be extended or retracted using hydraulic cylinders. By extending or retracting the sections, the attachment can reach deeper into racks, containers, or other storage areas, allowing forklifts to handle materials that are situated further away or at greater heights. This extension and retraction feature enhances the versatility of the forklift and enables efficient material handling in various environments.
Some forklift attachments, such as rotators or clamps, require rotational movement to handle loads effectively. Hydraulic cylinders can be integrated into these attachments to provide the necessary rotational capabilities. By utilizing hydraulic power, the attachment can rotate the load in either direction, allowing for precise positioning or transferring of goods. The inclusion of hydraulic cylinders enables controlled and smooth rotation, enhancing the efficiency and safety of material handling operations.
Hydraulic cylinders can be utilized in various specialized forklift attachments designed for specific material handling applications. Examples include attachments for handling drums, barrels, coils, or bales. These attachments often require unique lifting, clamping, or squeezing mechanisms, which can be achieved by incorporating hydraulic cylinders. The hydraulic cylinders provide the necessary force and control to handle specialized loads safely and efficiently, expanding the capabilities of the forklift in specific industries or tasks.
Hydraulic cylinders can facilitate quick and easy attachment changes on forklifts. Some forklifts are equipped with hydraulic quick-coupler systems that allow attachments to be rapidly connected or disconnected using hydraulic power. The hydraulic cylinders in the quick-coupler system enable a secure and efficient attachment change process, reducing downtime and improving productivity. This feature is particularly beneficial in applications where different attachments are frequently used, allowing forklifts to adapt to diverse material handling requirements swiftly.
The integration of hydraulic cylinders in forklift attachments provides numerous benefits, including improved lifting and tilting capabilities, extended reach and telescoping features, rotational movement, specialized handling options, and quick attachment changes. These advantages enhance the versatility, efficiency, and adaptability of forklifts, allowing them to handle a wide range of materials and perform specialized tasks in various industries.
How does a forklift hydraulic cylinder contribute to load rotation?
A forklift hydraulic cylinder plays a significant role in facilitating load rotation. The hydraulic cylinder enables the forklift to manipulate and reposition loads by providing controlled rotational movement. Here's an explanation of how the hydraulic cylinder contributes to load rotation:
The forklift hydraulic cylinder contributes to load rotation in the following ways:
1. Tilt Function:
Hydraulic cylinders are responsible for the tilt function of the forklift's mast or carriage. The hydraulic cylinder controls the tilting mechanism, allowing the forks or attachments to tilt forward or backward. By adjusting the tilt angle, the hydraulic cylinder enables the forklift to change the orientation of the load and achieve load rotation.
2. Controlled Movement:
The hydraulic cylinder provides controlled movement during load rotation. It allows the operator to adjust the speed and direction of the tilt function, ensuring smooth and precise rotation of the load. The operator can manipulate the hydraulic controls to achieve the desired rotation angle and maintain stability throughout the process.
3. Load Centering:
Hydraulic cylinders contribute to load rotation by assisting in load centering. The hydraulic system can be equipped with attachments such as rotators or clamps that are actuated by hydraulic cylinders. These attachments help secure the load and ensure it remains centered during rotation, preventing imbalances or accidents.
4. Load Manipulation:
The hydraulic cylinder allows for load manipulation during rotation. By controlling the tilt function, the hydraulic cylinder enables the forklift to precisely position the load, making it easier to place or retrieve items from specific locations. Load rotation facilitated by the hydraulic cylinder enhances the forklift's versatility and efficiency in various material handling tasks.
5. Operator Control:
Forklift hydraulic cylinders are operated by the forklift operator using hydraulic controls. The operator can adjust the tilt angle and speed of the hydraulic cylinder to achieve the desired load rotation. The hydraulic system provides the necessary responsiveness and control, allowing the operator to safely and accurately manipulate the load.
In summary, a forklift hydraulic cylinder enables load rotation through its tilt function, controlled movement, load centering capabilities, load manipulation, and operator control. The hydraulic cylinder's ability to provide controlled rotation enhances the forklift's versatility and efficiency in handling different types of loads and materials.
Can Hydraulic Cylinders be Customized for Specific Forklift Models?
Yes, hydraulic cylinders can be customized to fit specific forklift models. Forklift manufacturers and hydraulic cylinder suppliers often offer customization options to ensure compatibility and optimal performance with different forklift models. Here's a detailed explanation of how hydraulic cylinders can be customized for specific forklift models:
1. Cylinder Size and Dimensions:
Hydraulic cylinders can be customized to match the required size and dimensions of a specific forklift model. Forklifts come in various sizes, from small electric models to large industrial forklifts, and each model may have unique specifications for the hydraulic cylinder. By customizing the cylinder size, stroke length, bore diameter, and overall dimensions, it can be precisely tailored to fit the hydraulic system of the forklift model.
2. Lifting Capacity:
The lifting capacity of a forklift is determined by various factors, including the hydraulic cylinder's design and specifications. Hydraulic cylinders can be customized to match the required lifting capacity of a specific forklift model. This customization involves selecting the appropriate cylinder components, such as piston size, rod diameter, and hydraulic pressure ratings, to ensure the cylinder can handle the intended load capacity of the forklift.
3. Mounting and Connection:
Hydraulic cylinders need to be properly mounted and connected to the forklift's hydraulic system. The mounting style and connection points may vary depending on the forklift model. Customization allows for the adaptation of the hydraulic cylinder's mounting brackets, clevises, or other attachment mechanisms to fit the specific mounting requirements of the forklift. This ensures a secure and compatible connection between the cylinder and the forklift's hydraulic system.
4. Operating Parameters:
Customization of hydraulic cylinders also involves adjusting the operating parameters to meet the specific requirements of the forklift model. This includes setting the hydraulic pressure, flow rate, and other parameters to match the forklift's hydraulic system specifications. Customization ensures that the hydraulic cylinder operates within the recommended parameters, optimizing its performance and compatibility with the forklift.
5. Special Features and Accessories:
In some cases, specialized forklift models may require additional features or accessories in the hydraulic cylinder design. Customization allows for the inclusion of specific features such as position sensors, integrated valves, cushioning mechanisms, or other enhancements based on the unique requirements of the forklift model. These additional features enhance the functionality and performance of the hydraulic cylinder, addressing specific needs or challenges of the forklift application.
By offering customization options, hydraulic cylinder manufacturers can ensure that the cylinders are specifically tailored to fit the hydraulic systems of various forklift models. Customization allows for precise matching of size, lifting capacity, mounting style, operating parameters, and additional features, resulting in hydraulic cylinders that seamlessly integrate with specific forklift models and deliver optimal performance.
editor by CX 2023-11-23